JA 
EN 
ZH 
Features
DC24V 2835 SMD 160LED 6mm Free Cut LED Strip IP20 has following advantages
-
Short Cut Steps, Short Waste
Short cut increments mean less offcut. Dozens of unequal lengths on a job, and that adds up — in material, and in labour.
-
Fits Where Standard Strip Will Not
6 mm wide, so it gets into details a 10 mm board can’t. Keeps the design intent intact, no last-minute compromise.
-
Colour Stays Honest
Good rendering kills the most subjective failure in lighting: room’s bright enough, but it looks wrong. That’s expensive to argue about, and expensive to fix.
-
No Documentation Chase
CE, UL, RoHS already in place. Clears customs and site inspection without a paperwork scramble. Need a market-specific approval? We can add it.
Product Parameters
| Optical parameter | |
|---|---|
| LED Type: | 2835 SMD |
| CRI: | Ra>90 |
| CCT Range: | 2700K~6000K |
| Beam Angle: | 120° |
| Light Efficiency: | 93 lm/W |
| Lumen Output: | 1116 lm/m |
| Electric parameter | |
|---|---|
| Input Current: | 0.5 A/m |
| Input Voltage: | DC24V |
| Power: | 12 W/m |
| LEDs/Meter: | 160 |
| LEDs of Section: | 1 LED |
| PCB Width: | 6 mm |
Application Scenarios
Yeah, it’s CCT-tunable — 2700K to 6000K, all on one strip. Warm to cool, no need to swap reels.
The strip comes pre-scored. You make one clean cut at whatever interval you need. Saves install time, cuts waste on site.
It’s constant voltage, DC24V. Pair it with a DC24V driver sized to your total wattage and you’re good.
No. IP20’s dust-protected but not sealed, so keep it to dry indoor runs. If you actually need a waterproof version, don’t worry — just tell us and we’ll make it. OEM/ODM’s no problem for us.
Every 6.25 mm, at the marked pads. So it lands on the exact length you need. Circuit stays intact.
1116 lm/m at 93 lm/W. Enough to hit target lux without running hot or wasting power.
5-year warranty, CE/UL/RoHS listed. Good for international projects.
Related Products
Let’s Talk About Your Lighting Project
