Features

1. Dot-Free Linear Output
A densely packed 280 chips-per-metre COB surface produces one unbroken line of light — no hotspots and no visible dots, even when the strip sits a few centimetres from a glossy or mirrored surface.
2. 98 Lm/W Efficacy
Output is 780 lm/m from 8 W/m at 98 lm/W — a balanced specification that keeps power draw in proportion to the light delivered.
3. Cuttable Every 50 mm
Cut points at 50 mm intervals keep offcuts short and make the remaining length reusable on the next drop instead of scrap.
4. Ra>90 Colour Rendering
Rendering of Ra>90 keeps timber, textiles, food and skin tones close to how they read in daylight. It removes the grey cast that makes a finished space look cheaper than the design intent.
5. 280 LEDs per Metre
A 280 LEDs/m pitch packs the emitters close enough to read as one continuous line behind a diffuser, removing the scalloping a 60 LEDs/m strip leaves in the same profile.
6. 780 Lm/m Light Output
Delivering 780 lm/m, fewer parallel runs are needed to reach the target level, which simplifies both the wiring and the commissioning.

This COB LED Strip DC24V 280LEDs/m IP20 | Mingxue has the following advantages:

  • Colour Stays Honest

    Good rendering removes the most subjective failure mode in lighting: the room is bright enough, but it looks wrong. That is expensive to argue about and expensive to fix.

  • Cut to the Increment

    Not the Metre With a marked cut point every 50 mm, a run can be finished to the nearest increment rather than the nearest metre — which is where the offcut saving on dozens of unequal lengths actually comes from.

  • Complete Certifications

    Ready for Customs and Compliance With CE, UL, RoHS already secured, the order moves through customs and site sign-off without the usual documentation hold-up. We can add market-specific approvals on request.

  • 5-Year Cover

    Lower Total Cost Every strip ships with a 5-year warranty backed by our own reliability lab. Over the project lifecycle that is the difference between a fitting you replace and a fitting you forget.

Product Parameters

Optical parameter
LED Type: COB
CRI: Ra>90
CCT Range: 2700K/3000K/4000K/5000K/6000K
Beam Angle: 180°
LEDs/Meter: 280
Cutting Unit: 50 mm
IK / IP Grade: IP20
PCB Width: 10 mm
Roll Length: 5 m/reel
Electric parameter
Input Voltage: DC24V
Input Current: 0.33 A/m
Light Efficiency: 98 lm/W
Lumen Output: 780 lm/m
Power: 8 W/m
Static Electricity (ESD): 1000V
Warranty: 5-year warranty
Certification: CE, UL, RoHS
Energy Class: F

Application Scenarios

a0fc86127c4953f8a03e7a4a8f9d071
Cabinet Lighting
FAQ
Q1. Why does the DC24V 280LED COB LED Strip IP20 show no hotspots?

A1. The DC24V 280LED COB LED Strip IP20 uses flip-chip COB/CSP packaging under one phosphor layer, so the light reads as a continuous bar instead of separated SMD dots.

Q2. Can the DC24V 280LED COB LED Strip IP20 tune white from warm to cool?

A2. Yes – the DC24V 280LED COB LED Strip IP20 slides smoothly from 2700K-6000K to cool white on a single reel.

Q3. Can I tune the white point on the DC24V 280LED COB LED Strip IP20?

A3. Yes – the DC24V 280LED COB LED Strip IP20 is CCT-tunable across 2700K-6000K on one strip, so you move from warm to cool without swapping reels.

Q4. What driver does the DC24V 280LED COB LED Strip IP20 need?

A4. The DC24V 280LED COB LED Strip IP20 runs on DC24V constant-voltage, so pair it with a DC24V driver sized to your total wattage.

Q5. Can the DC24V 280LED COB LED Strip IP20 go outdoors?

A5. No – the DC24V 280LED COB LED Strip IP20 is built to IP20, dust-protected but not sealed, so keep it in dry, indoor runs.

Q6. How short can I cut the DC24V 280LED COB LED Strip IP20?

A6. You can cut the DC24V 280LED COB LED Strip IP20 every 50 mm at the marked pads, so it fits the exact length of the job without harming the circuit.

Q7. How bright is the DC24V 280LED COB LED Strip IP20?

A7. The DC24V 280LED COB LED Strip IP20 delivers 780 lm/m at 98 lm/W, enough to hit target lux without running hot or wasteful.

Specifications

  • Integrating Sphere Test Report-CN
    pdf
    0.61MB
  • Integrating Sphere Test Report-EN
    pdf
    0.6MB
  • Specifications-CN
    pdf
    12.29MB
  • Specifications-EN
    pdf
    4.14MB
Selected 0 items
TOTAL PAYLOAD SIZE:0 MB
Enter Password & Download

Let’s Talk About Your Lighting Project

    Please zip all files into one folder(Max 30MB)
    No matter what your question is, we will reply to you as soon as possible.
    contact2.2 1 1
    21+ Years of LED Lighting Manufacturing
    21+ Years of LED Lighting Manufacturing
    Integrated Manufacturing · OEM/ODM · Global Certifications

      Obtain industry information
      We will send you industry consultation materials and new product information.
      No Thanks, I'll Continue Browsing