Features
This Wall Washer Strip 24V 24LEDs/m IP67 DMX | Mingxue has the following advantages:
-
Reduce maintenance costs
The IP67 seal is the difference between a run that survives its first winter and one that returns as a warranty claim. It protects your margin as much as the fitting.
-
Unlimited Scenes
Addressable control means the install is not locked into one look. Scenes, chases and seasonal changes are a software question, not a re-installation.
-
Complete Certifications
With CE, UL, RoHS already secured, the order moves through customs and site sign-off without the usual documentation hold-up. We can add market-specific approvals on request.
-
Customizable
It can be produced according to the order length before leaving the factory, thereby reducing construction costs.
Product Parameters
| Optical parameter | |
|---|---|
| LED Type: | SMD3535 |
| CCT Range: | DMX RGBW |
| Beam Angle: | 10°×60°/20°×30°/45° |
| Light Efficiency: | 44 Lm/w |
| Lumen Output: | 1188 Lm/m |
| Electric parameter | |
|---|---|
| Input Voltage: | DC24V |
| Power: | 27 W/m |
| LEDs/Meter: | 24 |
| IP Grade: | IP67 |
| PCB Width: | 16mm |
Application Scenarios
Standard supply is 5 m/reel. Longer and shorter reel lengths, plus pre-terminated leads, can be produced for project orders.
Yes. It is sealed to IP67 — dust-tight and protected against temporary immersion — so exposed façades, pool surrounds and landscape details are all within scope.
It runs on DC24V constant voltage. Size the driver for the total run length plus headroom, and feed long runs from both ends to keep brightness even.
It uses the digital protocol, with each IC individually addressed. Send us your controller model and we will confirm compatibility before shipment.
This version uses a 20°×30° optic. Other angles are available in the same family, so the wash can be matched to the wall height and the set-back distance
It is supplied at RGBW. Other CCTs in the 2700–6500 K range are available on request, with binning held consistent between lots.
It is built on 3535SMD emitters at 24 per metre, drawing 27 W/m.
Run length depends on the PCB copper weight and the driver location. Share your layout and we will confirm the maximum single-feed length before you order.
Specifications
-
IESoctet-stream0.02MB
-
IESoctet-stream0.02MB
-
Chinese Specification Documentpdf3.7MB
-
English Specification Documentpdf3.79MB
Let’s Talk About Your Lighting Project