EN 
ZH 
JA 
Features
DC24V Constant Current LED Strip 2835SMD 120LEDs 12mm| Mingxue has following advantages
-
More Light, Fewer Watts
More light per watt adds up across a whole project. Smaller drivers, thinner cabling, lower connected load — all compared to running the same brief on older strip.
-
Uniform Along the Full Length
Even output along the whole run. Kills the gradient that makes long runs look unfinished, and saves you the extra feed points you’d normally add to hide it.
-
Material Stays on the Wall
Cut points every 50 mm. Offcuts stay short, leftover length gets reused on the next drop instead of hitting the bin. Over a full fit-out, that saving usually beats the unit price difference.
-
Test Before You Commit
Samples go out in 2 working days. Measure, approve, specify — before you commit. Schedule doesn’t slip.
Product Parameters
| Optical parameter | |
|---|---|
| LED Type: | 2835 SMD |
| CRI: | Ra>90 |
| CCT Range: | 2700K~6500K |
| Beam Angle: | 120° |
| Light Efficiency: | 100 lm/W |
| Lumen Output: | 900 lm/m |
| Electric parameter | |
|---|---|
| Input Current: | 0.40 A/m |
| Input Voltage: | DC24V |
| Power: | 9 W/m |
| LEDs/Meter: | 120 |
| Cutting Unit: | 50 mm |
| PCB Width: | 12 mm |
Application Scenarios
A1. Yeah. Constant-current IC keeps brightness uniform end to end. No fade on long runs, no dim end.
A2. DC24V, constant voltage. Grab a DC24V driver, size it to your total wattage, and you’re set.
A3. Nope. IP20 — dust-protected, not sealed. Dry indoor runs only. Need it waterproof? Drop us a line, we’ll sort it. OEM and ODM, we do that too.
A4. Every 50 mm, on the marked pads. Fits the exact length, circuit stays fine.
A5. 900 lm/m at 100 lm/W. Hits target lux, no overheating.
A6. 5 years. CE, UL, RoHS listed. Works for international projects.
Specifications
-
IES0.02MB
-
Spectrum Test Reportpdf0.55MB
-
English Specification Documentpdf2.97MB
Related Products
Let’s Talk About Your Lighting Project
