Features

1. Cuttable at Every Single LED
Every LED is a cut point. So the run finishes exactly where you need it. For signage and precision joinery, no dark tail left over from fixed cut intervals.
2. Cuttable Every 11.8 mm
Cut points marked at 11.8 mm. The run ends where the architecture ends, not where the reel happens to run out. Less offcut, fewer dark ends on show.
3. 22 Lm/W Efficacy
260 lm/m off 12 W/m — that's 22 lm/W. Not chasing efficiency here. When the brief wants punch, this is the spec that delivers.
4. 260 Lm/m Light Output
260 lm/m gives you headroom. Light the space properly instead of running the strip flat out.
5. DC12V Low-Voltage Operation
DC12V. Dead simple to install, and safe to touch. No special enclosure needed in most setups.

DC12V 5050 RGB 84LED 12mm Free Cut LED Strip IP20 | Mingxue has following advantages

  • Short Cut Steps, Short Waste

    Short cut steps mean less offcut. Dozens of unequal lengths on a job, and that adds up — in material, and in labour.

  • Ready for Customs and Compliance

    CE, UL and RoHS already in place. Clears customs and site sign-off without the usual paperwork hold-up. Need a market-specific approval? We can add it.

  • 5-Year Cover, Lower Total Cost

    Every strip comes with a 5-year warranty, backed by our own reliability lab. Over the life of the project, that’s the difference between a fitting you keep replacing and one you forget about.

  • Built to Your Length, Bin and Label

    Reel length, LED bin, cable exit, connector and packaging — all configurable. For distributors and OEM programmes, the strip arrives ready for your channel, no rework.

Product Parameters

Optical parameter
LED Type: 5050 RGB
CCT Range: RGB(SPIWS2815E)
Beam Angle: 120°
Light Efficiency: 22 lm/W
Lumen Output: 260 lm/m
CRI: N/A
Electric parameter
Input Current: 1 A/m
Input Voltage: DC12V
Power: 12 W/m
LEDs/Meter: 84
Cutting Unit: 11.8 mm
PCB Width: 12 mm

Application Scenarios

Commercial Spaces
Interior Decoration
Commercial Spaces
Interior Decoration
FAQ
Q1. How do I control the colours on this?

A1. Pixel-addressable over a standard RGB controller. Run chases, gradients, synced scenes — from a controller or your phone.

Q2. What's the Free Cut thing about?

A2. The strip’s pre-scored. One clean cut at whatever interval you need. Cuts install time and waste on site.

Q3. Which driver goes with it?

A3. Constant voltage, DC12V. Just pair it with a DC12V driver sized to your total wattage.

Q4. Can it go outside?

A4. No. IP20’s dust-protected but not sealed, so keep it to dry indoor runs. If you really need it waterproof, tell us and we’ll make it. OEM/ODM’s no problem.

Q5. How short can I trim it?

A5. Every 11.8 mm, at the marked pads. Lands right on the length you need. Circuit stays fine.

Q6. How bright is it?

A6. 260 lm/m at 22 lm/W. Enough to hit your target lux without running hot or wasting power.

Q7. What warranty comes with it?

A7. 5-year warranty, CE/UL/RoHS listed. Fine for international projects.

Specifications

  • Spectrum Test Report
    pdf
    0.64MB
  • English Specification Document
    pdf
    3.17MB
Selected 0 items
TOTAL PAYLOAD SIZE:0 MB
Enter Password & Download

Let’s Talk About Your Lighting Project

    Please zip all files into one folder(Max 30MB)
    No matter what your question is, we will reply to you as soon as possible.
    contact2.2 1 1
    21+ Years of LED Lighting Manufacturing
    21+ Years of LED Lighting Manufacturing
    Integrated Manufacturing · OEM/ODM · Global Certifications

      Obtain industry information
      We will send you industry consultation materials and new product information.
      No Thanks, I'll Continue Browsing