ZH 
EN 
JA 
Features
DC24V 10x10mm 3d IP67 Neon LED Strip | Mingxue has following advantages
-
What They Approved Is What They Get
Accurate rendering means the finished space matches the visual the client signed off. That is the difference between final payment on time and a re-lit room at your cost.
-
One Less Thing to Come Back For
An IP67 build shrugs off dust and water jets, so an outdoor install does not become a recurring maintenance line. The seal does the work a service call would otherwise do.
-
Short Cut Steps, Short Waste
Short cut increments translate directly into less offcut. On a project with dozens of unequal lengths, that is a real saving in both material and labour.
-
Five Years, On Your Side
Five-year quality backing helps you avoid unexpected replacement expenses and rising maintenance costs — this is the real value of a solid warranty.
Product Parameters
| Optical parameter | |
|---|---|
| LED Type: | SMD1216 |
| CRI: | Ra>90 |
| CCT Range: | 2700/3000/4000/5000/6500K |
| Beam Angle: | 120° |
| Light Efficiency: | 56 lm/W |
| Lumen Output: | 401 lm/m |
| Electric parameter | |
|---|---|
| Input Current: | 0.3 A/m |
| Input Voltage: | DC24V |
| Power: | 7.2 W/m |
| LEDs/Meter: | 224 |
| Cutting Unit: | 31.25 mm |
| IP Grade: | IP67 |
Application Scenarios
Sure the DC24V 10x10mm 3D IP67 Neon LED Strip has LEDs covered under a silicone cover. There are no visible dots. The light flows smoothly.
The minimum bending radius of the DC24V 10x10mm 3D IP67 Neon LED Strip is 300 mm for both side bending.
Yes the DC24V 10x10mm 3D IP67 Neon LED Strip supports color temperature tuning. The DC24V 10x10mm 3D IP67 Neon LED Strip can shift from white at 2700K to cool white at 6500K on the strip.
The DC24V 10x10mm 3D IP67 Neon LED Strip requires a constant-voltage driver. Make sure the driver wattage matches the load of the DC24V 10x10mm 3D IP67 Neon LED Strip.
Yes. The DC24V 10x10mm 3D IP67 Neon LED Strip is IP67 rated. The DC24V 10x10mm 3D IP67 Neon LED Strip is fully sealed against dust. Can handle temporary submersion making it safe for outdoor use.
You can cut the DC24V 10x10mm 3D IP67 Neon LED Strip every 31.25 mm at the marked points. Each cut leaves a working circuit on the DC24V 10x10mm 3D IP67 Neon LED Strip. No damage occurs to the DC24V 10x10mm 3D IP67 Neon LED Strip.
The DC24V 10x10mm 3D IP67 Neon LED Strip delivers 401 lumens per meter at 56 lumens, per watt. The DC24V 10x10mm 3D IP67 Neon LED Strip is bright enough to meet lighting targets without overheating or wasting energy.
Specifications
-
Specification Sheet ENpdf1.56MB
-
Specification Sheet CNpdf1.66MB
-
Spectrum Test Reportpdf0.36MB
-
IES0.02MB
Related Products
Let’s Talk About Your Lighting Project
