Features
DC12V 5050 RGB 84LED 8mm Free Cut LED Strip IP20 has following advantages
-
Less Offcut, Less Labour
Tight cut intervals mean fewer part-reels written off. It’s a quiet saving, but on repeat programmes it shows up clearly in the material budget.
-
Five Years, On Us
Five years cover. Replacement cost lands with us, not your maintenance budget. That’s how a warranty should actually work.
-
No Documentation Chase
CE, UL, RoHS certified. Clears customs and passes site inspection without a paperwork scramble. Need an extra approval somewhere? We’ll arrange it.
-
Samples in 2 Working Days
Evaluation samples ship out in 2 working days from our Shenzhen plant. Your spec decision doesn’t stall the programme waiting on a reel.
Product Parameters
| Optical parameter | |
|---|---|
| LED Type: | 5050 RGB |
| CCT Range: | RGB(SPIWS2815E) |
| Beam Angle: | 120° |
| Light Efficiency: | 22 lm/W |
| Lumen Output: | 260 lm/m |
| CRI: | N/A |
| Electric parameter | |
|---|---|
| Input Current: | 1 A/m |
| Input Voltage: | DC12V |
| Power: | 12 W/m |
| LEDs/Meter: | 84 |
| Cutting Unit: | 11.8 mm |
| PCB Width: | 8 mm |
Application Scenarios
A1. Pixel-addressable over a standard RGB controller. Run chases, gradients, synced scenes — from a controller or your phone.
A2. The strip’s pre-scored. One clean cut at whatever interval you need. Cuts install time and waste on site.
A3. Constant voltage, DC12V. Just pair it with a DC12V driver sized to your total wattage.
A4. No. IP20’s dust-protected but not sealed, so keep it to dry indoor runs. If you really need it waterproof, tell us and we’ll make it. OEM/ODM’s no problem.
A5. Every 11.8 mm, at the marked pads. Lands right on the length you need. Circuit stays fine.
A6. 260 lm/m at 22 lm/W. Enough to hit your target lux without running hot or wasting power.
A7. 5-year warranty, CE/UL/RoHS listed. Fine for international projects.
Specifications
-
Spectrum Test Reportpdf0.64MB
-
English Specification Documentpdf3.08MB
Related Products
Let’s Talk About Your Lighting Project