Features
DC24V 2835 SMD 120LED 5mm Free Cut LED Strip IP20 | Mingxue has following advantages
-
More Light, Fewer Watts
More light per watt compounds across a project: smaller drivers, thinner cabling and a lower connected load than the same brief specified on older strip.
-
Cut to the Increment, Not the Metre
With a marked cut point every 8.33 mm, a run can be finished to the nearest increment rather than the nearest metre — which is where the offcut saving on dozens of unequal lengths actually comes from.
-
Colour Stays Honest
Good rendering removes the most subjective failure mode in lighting: the room is bright enough, but it looks wrong. That is expensive to argue about and expensive to fix.
-
Warranty Backed by the Maker
The 5-year warranty is underwritten by in-house life testing, not a supplier’s certificate — so a claim is a conversation with the manufacturer, not a dispute.
Product Parameters
| Optical parameter | |
|---|---|
| LED Type: | 2835 SMD |
| CRI: | Ra>90 |
| CCT Range: | 2700K~6000K |
| Beam Angle: | 120° |
| Light Efficiency: | 115 lm/W |
| Lumen Output: | 1035 lm/m |
| Electric parameter | |
|---|---|
| Input Current: | 0.38 A/m |
| Input Voltage: | DC24V |
| Power: | 9 W/m |
| LEDs/Meter: | 120 |
| Cutting Unit: | 8.33 mm |
| PCB Width: | 5 mm |
Application Scenarios
A1. The strip’s pre-scored. One clean cut at whatever interval you need. Cuts install time and waste on site.
A2. Constant voltage, DC24V. Just pair it with a DC24V driver sized to your total wattage.
A3. No. IP20’s dust-protected but not sealed, so keep it to dry indoor runs. If you really need it waterproof, tell us and we’ll make it. OEM/ODM’s no problem.
A4. Every 8.33 mm, at the marked pads. Lands right on the length you need. Circuit stays fine.
A5. 1035 lm/m at 115 lm/W. Enough to hit your target lux without running hot or wasting power.
A6. 5-year warranty, CE/UL/RoHS listed. Fine for international projects.
Specifications
-
IES0.01MB
-
Spectrum Test Reportpdf0.55MB
-
English Specification Documentpdf2.91MB
Related Products
Let’s Talk About Your Lighting Project