E-mail: mx@mingxue.cn Phone/Whatsapp: +86 15813805905
zh_CN ZH
zh_CN ZH en_US EN ja JA
0
Click here to view favorites
0
Click here to view favorites
Please select the file to download
Download Files
View Inquiry List
Request a Quote

Features

1. Cuttable Every 50 mm:
Cut points at 50 mm intervals keep offcuts short and make the remaining length reusable on the next drop instead of scrap.
2. Ra90 Colour:
Rendering Rendering of Ra90 keeps timber, textiles, food and skin tones close to how they read in daylight. It removes the grey cast that makes a finished space look cheaper than the design intent.
3. 110 Lm/W Efficacy:
At 110 lm/W and 6 W/m, the strip does more with less. That shows up as a lower connected load at handover and a smaller annual energy line on the client's account.
4. 660 Lm/m Light Output:
At 660 lm/m, one run covers what would otherwise need two — fewer parallel circuits, fewer feed points and a simpler installation overall.
5. 4 mm Ultra-Slim PCB:
At just 4 mm wide it disappears into shallow aluminium channels, cabinet reveals and plaster-in profiles where a standard 10 mm strip will not sit flat.
6. 140 LEDs per Metre:
With 140 LEDs/m the emitters sit close enough to remove the dotted effect at normal viewing distance, even behind a shallow diffuser.

This Cabinet LED Strip DC24V 140LEDs/m IP20 4mm | Mingxue has the following advantages:

  • Short Cut Steps, Short Waste

    Short cut increments translate directly into less offcut. On a project with dozens of unequal lengths, that is a real saving in both material and labour.

  • Colour Stays True

    Good rendering removes the most subjective failure mode in lighting: the room is bright enough, but it looks wrong. That is expensive to argue about and expensive to fix.

  • More Light, Fewer Watts

    More light per watt compounds across a project: smaller drivers, thinner cabling and a lower connected load than the same brief specified on older strip.

  • Lower Lifetime Cost

    Our 5-year warranty comes with after-sales support that stays with you after installation — and helps keep total cost of ownership down over the life of the project.

Product Parameters

Optical parameter
LED Type: SMD2216
CRI: Ra90
CCT Range: 2700K/3000K/4000K/5000K/6500K
Beam Angle: 120°
Light Efficiency: 110 lm/W
Lumen Output: 660 lm/m
Energy Class: F
Electric parameter
Input Current: 0.25 A/m
Input Voltage: DC24V
Power: 6 W/m
LEDs/Meter: 140
Cutting Unit: 50 mm
IP Grade: IP20
PCB Width: 4 mm
Q1. Can the color temperature of this light strip be customized?

A1.Sure, the standard color temperature range is 2700 – 6500K. If there is a specific color temperature required, it can also be customized according to the request.

Q2. Is the DC24V SMD2216 140LED 4mm Cabinet LED Strip slim enough for cabinets?

A2. It’s low enough for cabinet lips, shelves and cases. Hidden, even wash.

Q3. What driver does the DC24V SMD2216 140LED 4mm Cabinet LED Strip need?

A3. DC24V CV. Size the driver to the total wattage.

Q4. Can this 4mm Cabinet LED Strip IP20 use outside?

A4. No — IP20 covers dust, not water. Dry indoor runs only.If you need a waterproof version, please contact the sales.

Q5. How short can I cut the DC24V SMD2216 140LED 4mm Cabinet LED Strip?

A5. 50 mm between pads. Cut there and the circuit’s fine.

Q6. How bright is the 4mm Cabinet LED Strip?

A6. 660 lm/m at 110 lm/W. Plenty, and it isn’t wasteful.

Q7. What’s the warranty of this strip?

A7. Five years, and CE / UL / RoHS come listed.

Specifications

  • Spectrum Test Report
    pdf
    0.55MB
  • IES
    0.01MB
  • English specification
    pdf
    9MB
Selected 0 items
TOTAL PAYLOAD SIZE:0 MB
Enter Password & Download

Let’s Talk About Your Lighting Project

    Please zip all files into one folder(Max 30MB)
    No matter what your question is, we will reply to you as soon as possible.
    contact2.2 1 1
    21+ Years of LED Lighting Manufacturing
    21+ Years of LED Lighting Manufacturing
    Integrated Manufacturing · OEM/ODM · Global Certifications
    href1 href2 href3

      Obtain industry information
      We will send you industry consultation materials and new product information.
      No Thanks, I'll Continue Browsing