Features

Cuttable at Every Single LED Every single LED is a legal cut point, so the strip ends exactly where you need it — channel letters, sign trays and tight cabinet reveals where a standard 50 mm or 100 mm increment leaves a dead section.
115 Lm/W Efficacy 115 Lm/W from 9 W/m: enough light per watt to reduce both the driver count and the heat that has to be managed inside a closed profile.
Cuttable Every 8.33 mm Every 8.33 mm there is a marked cut point, so a run can be finished to the nearest increment rather than to the nearest metre.
5 mm Ultra-Slim PCB
At just 5 mm wide it disappears into shallow aluminium channels, cabinet reveals and plaster-in profiles where a standard 10 mm strip will not sit flat.
Ra>90 Colour Rendering
A Ra>90 rating means merchandise and finishes look as intended under the installed light, not just on the sample board the client approved from.
1035 Lm/m Light Output
Delivering 1035 lm/m, fewer parallel runs are needed to reach the target level, which simplifies both the wiring and the commissioning.

DC24V 2835 SMD 120LED 5mm Free Cut LED Strip IP20 | Mingxue has following advantages

  • More Light, Fewer Watts

    More light per watt compounds across a project: smaller drivers, thinner cabling and a lower connected load than the same brief specified on older strip.

  • Cut to the Increment, Not the Metre

    With a marked cut point every 8.33 mm, a run can be finished to the nearest increment rather than the nearest metre — which is where the offcut saving on dozens of unequal lengths actually comes from.

  • Colour Stays Honest

    Good rendering removes the most subjective failure mode in lighting: the room is bright enough, but it looks wrong. That is expensive to argue about and expensive to fix.

  • Warranty Backed by the Maker

    The 5-year warranty is underwritten by in-house life testing, not a supplier’s certificate — so a claim is a conversation with the manufacturer, not a dispute.

Product Parameters

Optical parameter
LED Type: 2835 SMD
CRI: Ra>90
CCT Range: 2700K~6000K
Beam Angle: 120°
Light Efficiency: 115 lm/W
Lumen Output: 1035 lm/m
Electric parameter
Input Current: 0.38 A/m
Input Voltage: DC24V
Power: 9 W/m
LEDs/Meter: 120
Cutting Unit: 8.33 mm
PCB Width: 5 mm

Application Scenarios

Commercial Spaces
Interior Decoration
Commercial Spaces
Interior Decoration
FAQ
Q1. What's the Free Cut thing about?

A1. The strip’s pre-scored. One clean cut at whatever interval you need. Cuts install time and waste on site.

Q2. Which driver goes with it?

A2. Constant voltage, DC24V. Just pair it with a DC24V driver sized to your total wattage.

Q3. Can it go outside?

A3. No. IP20’s dust-protected but not sealed, so keep it to dry indoor runs. If you really need it waterproof, tell us and we’ll make it. OEM/ODM’s no problem.

Q4. How short can I trim it?

A4. Every 8.33 mm, at the marked pads. Lands right on the length you need. Circuit stays fine.

Q5. How bright is it?

A5. 1035 lm/m at 115 lm/W. Enough to hit your target lux without running hot or wasting power.

Q6. What warranty comes with it?

A6. 5-year warranty, CE/UL/RoHS listed. Fine for international projects.

Specifications

  • IES
    0.01MB
  • Spectrum Test Report
    pdf
    0.55MB
  • English Specification Document
    pdf
    2.91MB
Selected 0 items
TOTAL PAYLOAD SIZE:0 MB
Enter Password & Download

Let’s Talk About Your Lighting Project

    Please zip all files into one folder(Max 30MB)
    No matter what your question is, we will reply to you as soon as possible.
    contact2.2 1 1
    21+ Years of LED Lighting Manufacturing
    21+ Years of LED Lighting Manufacturing
    Integrated Manufacturing · OEM/ODM · Global Certifications

      Obtain industry information
      We will send you industry consultation materials and new product information.
      No Thanks, I'll Continue Browsing