ZH 
EN 
JA 
Features
This Flexible LED Strip 24V 60LEDs/m IP67 has the following advantages:
-
Fewer Call-Backs Outdoors
The IP67 seal is the difference between a run that survives its first winter and one that comes back as a warranty claim. It protects your margin as much as the fitting.
-
Lower Running Cost
At 115 Lm/w, the same lumen target is reached with less connected load. On a project metered by the client, that difference keeps showing up on the energy bill long after handover.
-
Less Waste on Site
Being able to trim at 100 mm keeps the offcut bin empty. Over a full fit-out that saving in material and labour is usually larger than the difference in unit price
-
5-year Warranty
The 5-year warranty is backed by our own reliability lab rather than a supplier’s certificate, so a claim is a conversation with the manufacturer, not a dispute.
Product Parameters
| Optical parameter | |
|---|---|
| LED Type: | 2835 |
| CRI: | Ra>90 |
| CCT Range: | 570-590nm |
| Beam Angle: | 120° |
| Light Efficiency: | 115 Lm/w |
| Lumen Output:: | 1495 Lm/m |
| Electric parameter | |
|---|---|
| Input Current: | 0.5 A/m |
| Input Voltage: | DC24V |
| Power: | 12W/m |
| Cutting Unit: | 100mm |
| PCB Width: | 10mm |
| IP Grade: | IP67 |
It can be cut at the marked points every 100 mm. Cutting between those points will disable the section after it, so always trim on the copper pads shown on the tape.
The emitters are binned in the 570–590 nm amber band, which is outside the range that attracts most flying insects. There are no chemicals, coatings or consumables involved.
Standard supply is 5 m/reel. Longer and shorter reel lengths, plus pre-terminated leads, can be produced for project orders.
It runs on DC24V constant voltage. Size the driver for the total run length plus headroom, and feed long runs from both ends to keep brightness even.
Yes. It is sealed to IP67 — dust-tight and protected against temporary immersion — so exposed façades, pool surrounds and landscape details are all within scope.
Run length depends on the PCB copper weight and the driver location. Share your layout and we will confirm the maximum single-feed length before you order.
This version covers 570-590nm. Fixed single-CCT options across the 2700–6500 K range can also be produced against a project order.
It is specified at Ra>90. Where a project demands higher fidelity, 95+ versions are available — worth confirming at sample stage so the approved look matches the delivered product.
Specifications
-
Chinese Specification Documentpdf3.44MB
-
English Specification Documentpdf3.31MB
Let’s Talk About Your Lighting Project
