ZH 
EN 
JA 
Features
This Flexible LED Strip 5V 60LEDs/m IP20 | Mingxue has the following advantages:
-
Lower Running Cost
At 117 lm/W, the same lumen target is reached with less connected load. On a project metered by the client, that difference keeps showing up on the energy bill long after handover.
-
No Colour Complaints After Handover
With Ra>90, what the client approved at sample stage is what they get on the wall. It removes the most subjective — and most expensive — category of post-installation dispute.
-
Less Waste on Site
Being able to trim at 25 mm keeps the offcut bin empty. Over a full fit-out that saving in material and labour is usually larger than the difference in unit price.
-
Samples Ship in 2 Working Days
Samples go out in 2 working days. You can test, measure and approve before committing — without the schedule slipping.
Product Parameters
| Optical parameter | |
|---|---|
| LED Type: | SMD2835 |
| CRI: | Ra>90 |
| CCT Range: | 3000K |
| Beam Angle: | 120° |
| Light Efficiency: | 128 Lm/w |
| Lumen Output: | 558 Lm/m |
| Electric parameter | |
|---|---|
| Input Current: | 1 A/m |
| Input Voltage: | DC5V |
| Power: | 5 W/m |
| Static Electricity (ESD): | 1000V |
| LEDs/Meter: | 60 |
| Cutting Unit: | 16.66 mm |
The emitters are binned in the 570–590 nm amber band, which is outside the range that attracts most flying insects. There are no chemicals, coatings or consumables involved
Standard supply is 5 m/reel. Longer and shorter reel lengths, plus pre-terminated leads, can be produced for project orders.
It runs on DC5V constant voltage. Size the driver for the total run length plus headroom, and feed long runs from both ends to keep brightness even.
It can be cut at the marked points every 16.66 mm. Cutting between those points will disable the section after it, so always trim on the copper pads shown on the tape.
Run length depends on the PCB copper weight and the driver location. Share your layout and we will confirm the maximum single-feed length before you order.
This version is IP20 and intended for dry interior use. For outdoor or wet-area installations, the same family is available in IP65, IP67 and IP68.
It is supplied at 3000K. Other CCTs in the 2700–6500 K range are available on request, with binning held consistent between lots.
It is specified at Ra>90. Where a project demands higher fidelity, 95+ versions are available — worth confirming at sample stage so the approved look matches the delivered product.
Specifications
-
English Specification Documentpdf2.91MB
-
Chinese Specification Documentpdf3.72MB
Let’s Talk About Your Lighting Project
