Features
This SPI RGB LED Strip DC24V 84LEDs/m IP65 10mm | Mingxue has the following advantages:
-
Built for Exposed Runs
Sealing to IP65 removes the most common cause of outdoor strip failure — moisture at the cut point and the connector. That means fewer truck rolls and fewer arguments about who pays.
-
Less Waste on Site
Trimming every 83.3 mm lets the run finish exactly where it should, so installers are not binning usable strip or hiding a dark tail behind the trim. On multi-drop jobs the material saving is measurable.
-
New Look, Same Fitting
With per-pixel addressing, the same run serves a launch event, a quiet weekday and a seasonal campaign. The look is a setting, not a rebuild.
-
Cost of Ownership Stays Down
A 5-year warranty is not a marketing line here; it is backed by in-house testing and shows up as a lower cost of ownership across the life of the install. Replacement sits with us, not your maintenance budget.
Product Parameters
| Optical parameter | |
|---|---|
| LED Type: | SMD5050 |
| IC: | FW1935 14MA |
| CCT Range: | RGBR |
| Beam Angle: | 120° |
| Light Efficiency: | 41 lm/W |
| Lumen Output: | 497 lm/m |
| Energy Class: | N/A |
| Electric parameter | |
|---|---|
| Input Current: | 0.5 A/m |
| Input Voltage: | DC24V |
| Power: | 12 W/m |
| LEDs/Meter: | 84 |
| Cutting Unit: | 83.3 mm |
| IP Grade: | IP65 |
| PCB Width: | 10 mm |
Application Scenarios
A1. Pixel-addressable over standard RGB control. Chases, gradients and synced scenes all run off a controller or an app.
A2. DC24V constant-voltage. Pair it with a DC24V driver sized to your total wattage.
A3. IP65-rated: dust-tight and protected against water jets. Covered outdoor and damp areas are fine.
A4. Every 83.3 mm at the marked pads, so you get the exact length without harming the circuit.
A5. Five years, with CE / UL / RoHS on the paperwork – the bit international projects check for.
Specifications
-
English specificationpdf1.24MB
Related Products
Let’s Talk About Your Lighting Project