Features

1. Individually Addressable Pixels:
Each IC is individually addressed, so chases, gradients and video-grade effects are written per pixel rather than per strip. FW1935 control keeps it synchronised over long distances.
2. IP65 Sealed:
Construction IP65 sealing covers the environments that cause most strip failures in practice — humidity, splashing and dust — without the cost of a fully submersible build.
3. Cuttable Every 83.3 mm:
Marked cut points at 83.3 mm intervals mean the run finishes where the architecture does, rather than where the reel happens to allow. Less offcut, fewer visible dark ends.
4. DC24V Low-Voltage Operation:
Running on DC24V keeps the fixture SELV and safe to handle, and lets it be specified in occupied, touchable locations without additional protection.
5. ESD Protected to 1000V:
Each emitter is protected to 1000V against electrostatic discharge, which reduces handling losses during installation and early-life failures on site.

This SPI RGB LED Strip DC24V 84LEDs/m IP65 10mm | Mingxue has the following advantages:

  • Built for Exposed Runs

    Sealing to IP65 removes the most common cause of outdoor strip failure — moisture at the cut point and the connector. That means fewer truck rolls and fewer arguments about who pays.

  • Less Waste on Site

    Trimming every 83.3 mm lets the run finish exactly where it should, so installers are not binning usable strip or hiding a dark tail behind the trim. On multi-drop jobs the material saving is measurable.

  • New Look, Same Fitting

    With per-pixel addressing, the same run serves a launch event, a quiet weekday and a seasonal campaign. The look is a setting, not a rebuild.

  • Cost of Ownership Stays Down

    A 5-year warranty is not a marketing line here; it is backed by in-house testing and shows up as a lower cost of ownership across the life of the install. Replacement sits with us, not your maintenance budget.

dynamic strip

Product Parameters

Optical parameter
LED Type: SMD5050
IC: FW1935 14MA
CCT Range: RGBR
Beam Angle: 120°
Light Efficiency: 41 lm/W
Lumen Output: 497 lm/m
Energy Class: N/A
Electric parameter
Input Current: 0.5 A/m
Input Voltage: DC24V
Power: 12 W/m
LEDs/Meter: 84
Cutting Unit: 83.3 mm
IP Grade: IP65
PCB Width: 10 mm

Application Scenarios

rgb strip
KTV/Bar
FAQ
Q1. How do I control colour on the DC24V SPI RGB Addressable LED Strip?

A1. Pixel-addressable over standard RGB control. Chases, gradients and synced scenes all run off a controller or an app.

Q2. What driver does the SPI RGB Addressable LED Strip need?

A2. DC24V constant-voltage. Pair it with a DC24V driver sized to your total wattage.

Q3. Is the DC24V SPI RGB Addressable LED Strip weatherproof?

A3. IP65-rated: dust-tight and protected against water jets. Covered outdoor and damp areas are fine.

Q4. How short can I cut the DC24V SPI RGB Addressable LED Strip?

A4. Every 83.3 mm at the marked pads, so you get the exact length without harming the circuit.

Q5. What warranty covers the DC24V SPI RGB Addressable LED Strip?

A5. Five years, with CE / UL / RoHS on the paperwork – the bit international projects check for.

Specifications

  • English specification
    pdf
    1.24MB
Selected 0 items
TOTAL PAYLOAD SIZE:0 MB
Enter Password & Download

Let’s Talk About Your Lighting Project

    Please zip all files into one folder(Max 30MB)
    No matter what your question is, we will reply to you as soon as possible.
    contact2.2 1 1
    21+ Years of LED Lighting Manufacturing
    21+ Years of LED Lighting Manufacturing
    Integrated Manufacturing · OEM/ODM · Global Certifications

      Obtain industry information
      We will send you industry consultation materials and new product information.
      No Thanks, I'll Continue Browsing