Features
This RGBW LED Strip DC24V 84LEDs/m IP20 12mm | Mingxue has the following advantages:
-
More Light, Fewer Watts
More light per watt compounds across a project: smaller drivers, thinner cabling and a lower connected load than the same brief specified on older strip.
-
Less Offcut, Less Labour
Tight cut intervals mean fewer part-reels written off. It is a quiet saving, but on repeat programmes it shows up clearly in the material budget.
-
Five Years Warranty
Five-year cover means the replacement cost lands with us rather than your maintenance budget — which is how a warranty should actually work.
-
Samples in 2 Working Days
Evaluation samples ship within 2 working days from our Shenzhen plant, so a specification decision does not stall the programme waiting on a reel.
Product Parameters
| Optical parameter | |
|---|---|
| LED Type: | SMD5050 |
| CRI: | Ra>80 |
| CCT Range: | RGBW |
| Beam Angle: | 120° |
| Light Efficiency: | 100 lm/W |
| Lumen Output: | 1110 lm/m |
| Energy Class: | F |
| Electric parameter | |
|---|---|
| Input Current: | 0.8 A/m |
| Input Voltage: | DC24V |
| Power: | 19.2 W/m |
| LEDs/Meter: | 84 |
| Cutting Unit: | 71.4 mm |
| IP Grade: | IP20 |
| PCB Width: | 12 mm |
Application Scenarios
A1. Yes. The white point tunes across 4000K on a single strip, so warm through cool all comes off the same reel. No swapping halfway through a job, and no second part number cluttering up the shelf.
A2. DC24V constant-voltage, nothing exotic. Work out the wattage of the run, then pick a DC24V driver that covers it – that’s the whole power story, really.
A3. No. IP20 means dust-protected, and that’s the end of it. There’s no sealing against water, so it stays in dry indoor runs where nothing can splash it.
A4. Every 71.4 mm, at the marked pads. Snip there and the remaining run keeps working, so you’re not left holding a dead tail that has to be binned.
A5. 1110 lm/m, delivered at 100 lm/W. Enough to hit target lux comfortably, and it gets there without running hot or wasting power on the way.
A6. Five years, and CE / UL / RoHS come listed on the paperwork. That’s normally the first thing an international project asks about, so it saves a round of emails.
Specifications
-
English specificationpdf4.88MB
-
IES0.02MB
Related Products
Let’s Talk About Your Lighting Project