ZH 
EN 
JA 
Features
DC12V 2835 SMD 160LED 6mm Free Cut LED Strip IP20| Mingxue has following advantages
-
Lower Energy Draw
Each watt does more, so the installed load stays low. Easier to specify, cheaper to run, less heat to deal with on long runs.
-
Short Cut Steps, Short Waste
Short cut steps mean less offcut. Dozens of unequal lengths on a job, and that adds up — material and labour both.
-
What They Approved Is What They Get
Rendering’s accurate, so the finished space matches what the client signed off. That’s the difference between getting paid on time and re-litigating the room at your own cost.
-
5-Year Cover, Lower Total Cost
Every strip ships with a 5-year warranty, backed by our own reliability lab. Over the life of the project, that’s a fitting you keep replacing vs. one you forget about.
Product Parameters
| Optical parameter | |
|---|---|
| LED Type: | 2835 SMD |
| CRI: | Ra>90 |
| CCT Range: | 2700K~6000K |
| Beam Angle: | 120° |
| Light Efficiency: | 100 lm/W |
| Lumen Output: | 800 lm/m |
| Electric parameter | |
|---|---|
| Input Current: | 0.67 A/m |
| Input Voltage: | DC12V |
| Power: | 8 W/m |
| LEDs/Meter: | 160 |
| Cutting Unit: | 6.25 mm |
| PCB Width: | 6 mm |
Application Scenarios
A1. Pre-scored. Cut wherever you need. Less install time, less waste on site.
A2. DC12V, constant voltage. Just grab a driver sized to your total wattage.
A3. Nope. IP20 — dust-protected, not sealed. Indoor, dry runs only. Need it waterproof? Tell us, we’ll sort it. OEM/ODM’s fine.
A4. Every 6.25 mm, on the marked pads. Fits the exact length, circuit stays fine.
A5. 800 lm/m, 100 lm/W. Hits target lux, no overheating.
A6. 5 years. CE/UL/RoHS listed. Works for international projects.
Related Products
Let’s Talk About Your Lighting Project
